Arduino LED pattern

In this Project, we will see about how to make LED Pattern in Arduino Pattern are created by programatically..

Circuit Diagram:

Arduino Code:

led_pattern_code.ino

//This Code is Developed by Sdev
//Follow Us Here : https://youtube.com/sdevelectronics

#define delay50 100

int myled[] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11};
int num_of_leds;

void setup() {
  num_of_leds = sizeof(myled) / sizeof(int);
  for (int i = 0; i < num_of_leds; i++) {
    pinMode(myled[i], OUTPUT);
  }
}

void loop() {
  delay(1000);
  ledonn();
  delay(2000);
  ledoff();
  delay(2000);
  for (int i = 0; i < 5; i++) {
    pattern1();
  }
  for (int i = 0; i < 5; i++) {
    pattern2();
  }
  for (int i = 0; i < 5; i++) {
    pattern3();
  }
  for (int i = 0; i < 5; i++) {
    pattern4();
  }
  for (int i = 0; i < 25; i++) {
    pattern5();
  }
  for (int i = 0; i < 5; i++) {
    pattern6();
  }
  for (int i = 0; i < 15; i++) {
    pattern7();
  }
  for (int i = 0; i < 15; i++) {
    pattern8();
  }
  for (int i = 0; i < 5; i++) {
    pattern9();
  }
  for (int i = 0; i < 5; i++) {
    pattern10();
  }
  for (int i = 0; i < 50; i++) {
    pattern11();
  }
  for (int i = 0; i < 50; i++) {
    pattern12();
  }
  ledoff();
  delay(5000);
}

//TURN ON ALL LEDs
void ledonn() {
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], HIGH);
  }
}

//TURN OFF ALL LEDs
void ledoff() {
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], LOW);
  }
}

//LEFT TO RIGHT
void pattern1() {
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], HIGH);
    delay(delay50);
    digitalWrite(myled[i], LOW);
  }
}

//RIGHT TO LEFT
void pattern2() {
  for (int i = num_of_leds; i > 0; i--) {
    digitalWrite(myled[i - 1], HIGH);
    delay(delay50);
    digitalWrite(myled[i - 1], LOW);
  }
}

//LEFT TO RIGHT FILL
void pattern3() {
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], HIGH);
    delay(delay50);
  }
  for (int i = num_of_leds; i > 0; i--) {
    digitalWrite(myled[i - 1], LOW);
    delay(delay50);
  }
}

//RIGHT TO LEFT FILL
void pattern4() {
  ledonn();
  delay(delay50);
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], LOW);
    delay(delay50);
  }
  for (int i = num_of_leds; i > 0; i--) {
    digitalWrite(myled[i - 1], HIGH);
    delay(delay50);
  }
  ledoff();
}

//ALTERNATE LEDs
void pattern5() {
  for (int i = 0; i < num_of_leds; i = i + 2) {
    digitalWrite(myled[i], HIGH);
    digitalWrite(myled[i + 1], LOW);
  }
  delay(delay50);
  for (int i = 0; i < num_of_leds; i = i + 2) {
    digitalWrite(myled[i], LOW);
    digitalWrite(myled[i + 1], HIGH);
  }
  delay(delay50);
}

//OSCILLATING LEDs
void pattern6() {   //osc
  for (int i = 0; i < num_of_leds; i++) {
    digitalWrite(myled[i], HIGH);
    delay(delay50);
    digitalWrite(myled[i], LOW);
  }
  delay(delay50);
  for (int i = num_of_leds; i > 0; i--) {
    digitalWrite(myled[i - 1], HIGH);
    delay(delay50);
    digitalWrite(myled[i - 1], LOW);
  }
}

//INSIDE
void pattern7() {
  for (int i = 0; i < num_of_leds / 2; i++) {
    digitalWrite(myled[i], HIGH);
    digitalWrite(myled[num_of_leds - 1 - i], HIGH);
    delay(delay50);
    digitalWrite(myled[i], LOW);
    digitalWrite(myled[num_of_leds - 1 - i], LOW);
  }
}

//OUTSIDE
void pattern8() {
  for (int i = (num_of_leds / 2) - 1; i >= 0 ; i--) {
    digitalWrite(myled[i], HIGH);
    digitalWrite(myled[num_of_leds - 1 - i], HIGH);
    delay(delay50);
    digitalWrite(myled[i], LOW);
    digitalWrite(myled[num_of_leds - 1 - i], LOW);
  }
}

//LEFT TO RIGHT 3 LEDs
void pattern9() {
  for (int i = 0; i < num_of_leds + 3; i++) {
    if (i <= num_of_leds) {
      digitalWrite(myled[i], HIGH);
    }
    if (i > 2) {
      digitalWrite(myled[i - 3], LOW);
    }
    delay(delay50);
  }
}

//OSCILLATING 3 LEDs
void pattern10() {
  for (int i = 2; i < num_of_leds; i++) {
    if (i == 2) {
      digitalWrite(myled[0], HIGH);
      digitalWrite(myled[1], HIGH);
    }
    digitalWrite(myled[i], HIGH);
    digitalWrite(myled[i - 3], LOW);
    delay(delay50);
  }
  for (int i = num_of_leds - 4; i > -1; i--) {
    digitalWrite(myled[i], HIGH);
    digitalWrite(myled[i + 3], LOW);
    delay(delay50);
  }
}

//RANDOM EFFECT 1
void pattern11() {
  int randomnum = random(0, num_of_leds + 1);
  digitalWrite(myled[randomnum], HIGH);
  delay(delay50);
  digitalWrite(myled[randomnum], LOW);
  delay(delay50);
}

//RANDOM EFFECT 2
void pattern12() {
  int randomonn = random(0, num_of_leds + 1);
  int randomoff = random(0, num_of_leds + 1);
  digitalWrite(myled[randomonn], HIGH);
  digitalWrite(myled[randomoff], LOW);
  delay(delay50);
}

Youtube Video Tutorial:

https://youtu.be/yY-Ub4JKfgQ

Download our official Android App in PlayStore. Click Here

You can get the all the required files (like Circuit Diagram, Arduino.ino file, Libraries Used, and others) for the project  in ZIP format and much more...